Material Lab - Scope of Accreditation
	HP Pelzer has been designated as an accredited laboratory by The American Association For Laboratory Accreditation (A2LA), in the field of Mechanical Testing.  We meet the requirements of ISO/IEC 17025:2005 - "General Requirements for the Competence of Testing and Calibration Laboratories".
	Scope of Accreditation to ISO/IEC 17025:2005 Revised 12/18/03
	American Association for Laboratory Accreditation Scope of Accreditation Certificate
	Test Description	Test Methods
	Taber Abrasion	SAE J1530; Chrysler CLP 463 KB-21-01; GM 9337P; GMW 3208
	Adhesion Test	ASTM D903, D413, D751; Chrysler CLP 463 LB-10-01; Ford FLTM BN 151-05, 113-01; GM 2211M*, 3608M*, 3602M*, 9193P, 2780M*, 7457M*
	Ash Content	ASTM: D586, D1278
	Bearding	SAE: J1530, Method A (modified)
	Cleanability	Chrysler CLP 463 KC-04-01; Ford FLTM BN 112-08; GMW 3402
	Cold Cracking	SAE J323; Chrysler CLP 463 LB-11-01; Ford WSS-M99P32*; GM 2715M*, 7457M*, 2755M*, 2212M*; GMW 14108
	Color Evaluation	ASTM D6290; SAE J1767, J361; Chrysler CS-9022, MS-JP1-3*; Ford FLTM109-01
	Compression	ASTM D3574, D395; ISO 1856; SAE J1352
	Corrosion	SAE: J1389
	Crocking	AATCC 8; SAE J861; Ford FLTM BN 107-01, 02
	Density/Specific Gravity	ASTM D3574 A
	Dust - Out	GM 9635P
	Dye Transfer   Color Bleeding   Color Transfer to Water	AATCC 107; Chrysler CLP 463KC-01-01; Ford FLTM AN 101-01; GMW 14141
	Environmental Conditioning	GMW 3221 (Cook A)
	Environmental Exposure	Chrysler CLP 463LB-12-01B, MS-HZ100*; Ford WSS-M99P32*, WSS-M15P6*, WSS-M15P32*; GM 9200P, 9505P (except G & J), 3608M*; GMW 14124
	Fiber Degradation	GM 9771P; GMW 3387
	Flammability	ISO 3795; FMVSS 302; SAE J369; Chrysler MS-JP9-4*; GM 9070P, 6090M; GMW 3232; Honda C206A, D6003-99
	Fluid Resistance	ASTM D896; Chrysler MS-HZ100*
	Fogging	SAE J1756; GM 9305P; GMW 3235
	Force Deflection	ASTM D3574
	Fungus/Mildew	GM: 9128P Ford: WSS-M99P32*, M8P16*, M15P44*, M15P6*, M15P32*
	Hardness	ASTM D2240 Type A
	Heat Aging	Chrysler CLP 463LB-13-01, MS-AY352, MS-HZ100; Ford WSS-M15P6, WSS-M99P32*
	Humidity Exposure	SAE J1351; Chrysler CLP 463KC-9-01; Ford FLTM BO-131-01, 02; GMW 3205
	Low Temperature Brittleness	SAE: J323 Chrysler: CLP 463-LB-11-01 GM: 2715M, 7457M, 2755M, 2212M Ford: WSS-M99P32
	Odor	SAE: J1351 Chrysler: CLP 46-KC-9-01 Ford: FLTM BN 105-01, 03
	Oven/Heat Exposure	Chrysler: CLP 463-LB-13-01, MS-AY352, MS-HZ100 Ford: WSS-M15P6, WSS-M99P32
	Salt Immersion	Chrysler MS-JP1-3*, MS-JB2000*
	Shrinkage/ Dimensional Stability	ASTM D2646; SAE J315 (15), J883, J855; Ford FLTM BN 105-01, 03; GM 2212M; GMW 4217
	Stain Resistance	GM 9214P, 7457M*, 2715M*, 2794M*
	Stiffness	SAE J949; GM 2212M*
	Tear Strength	Tongue Method ASTM D1117, D2261, D3574; Chrysler CLP 463 KB-03-01; Trapezoid Method ASTM D1117, D5587, D5733; “C” Block Method ASTM D624; ISO 34-1
	Tensile Strength	Grab Method ASTM D5034, D751, D1117; Dumbbell Method ASTM D412, D3574; GMW 3010
	Thickness	ISO 5084; SAE J882, J1355; Chrysler CLP 463LB-07-01
	Tuft Lock	ASTM D1335; Chrysler CLP 463KB-22-01; GM 9127P
	Water Spotting	AATCC 22; Chrysler CLP 463KC-03-01; GM 9133P
	Weight/Mass	ASTM D3776; SAE J860; Chrysler CLP 463LB-07-01; Ford FLTM BN 106-01; GMW 3182
	Wicking	SAE: J913
	* The laboratory is accredited for the test methods listed above. The accredited test methods are used in determining compliance with the material specifications listed; however, the inclusion of these material specifications on this Scope does not confer laboratory accreditation to the material specifications. Inclusion of these material specifications on this Scope also does not confer accreditation for every method embedded within the specification. Only the methods listed above on this Scope are accredited.